In general, the larger the focal width of an eyepiece, the smaller the magnification. The focal width is indicated in millimeters, and it is written on each eyepiece. Afterward, you can gradually move to eyepieces with smaller focal widths. It is important that you always choose an eyepiece with the highest focal width for the beginning of your observation. By using the azimuth mount like a turntable you can pan the telescope to the left and to the right. Use the wheel (7) to tilt the telescope up and down. With the height adjustment wheel (7) and the turntable azimuth mount, you can point the telescope at any object you want. Use a stable surface like a table or countertop.Īzimuthal mounting means that you can move your telescope up and down, left and right. Please look for a suitable location to set up your telescope before you begin.
Do not use it to look into apartments, for example. This device is intended only for private use. Do not expose the device to high temperatures.The dealer will contact the Service Centre and can send the device in to be repaired, if necessary. In the event of a defect, please contact your dealer. The concentration of light can cause fires or burns. Never subject the device, especially the optics, to direct sunlight.Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as they pose a choking hazard. Children should only use the device under adult supervision.I might try to implement the missing features of the Bresser driver.
You just have to do the steps 6 to 8 with your software of choice. Leave Device Hub running in the background Now you should be able to slew to different stars ) If you want to connect any more software like your guiding with PH2.
Don't select Bresser ASCOM driver, but the one provided by the device hub. Open the telescope configuration (ctrl + 0 in stellarium)Īdd a new telescope with ASCOM drivers. If you want use a planetarium software like stellarium or cartes du ciel, do the following steps. The arrow key options are not implemented in the Bresser Driver and will crash your Devicehub. Open the ASCOM Device Hub and navigate to the setup optionsĬonnect the Telescope and select the right COM Port Now you should be able to control your Exos 2 with the Device Hub via Direct Slew & Parking. Install the ASCOM Platform as well as the drivers from the link aboveĬonnect your Telescope with your Computer via serial cable The drivers made by Bresser and published by Spitzbube work as intended: Hello everyone, u/EccMcc and myself have made some progress on the issues at hand.
0 kommentar(er)
